 |
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Dispplay: | LCD With 128 Dot*64 Dot | Support: | Support 5th Axis |
|---|---|---|---|
| System: | For Mach3 | ||
| High Light: | small cnc router,desktop cnc wood router |
||
3 Axis 4 Axis CNC Wireless Handwheel Wireless MPG USB Mach3 for CNC Router
Specifications:
|
Name |
Voltage |
Current |
Note |
|
Wireless USB Receiver |
4.5V~5.0V |
Less than 50mA |
|
|
Wireless Handle |
1.5V~3.0V |
Average Current Less than 2mA |
Use of time More than 2 months USE Two 2000MAH Battery |
Description:
1.The RF is Standard with 2.4G ISM ,the Tx power is 0DB and the RX sensitivity is -98DB.
2. The RF has 64 channels,the channel gap is 1Mhz.
3. The transmission distance is further than 15 meters with no barrier.
4. The protocol Designed with high performance.
5. To jump frequency Adaptively when noised,which can work with 2.4G wireless Mic,Wlan andBluetoothetc. devices.
6. 32 setsWirelessHandlework fine at the same time in one room,withno-interference each other.
Note:
First, please put 1.5v battery.
Second, please insert USB receiver on the computer at first, then install the driver. Otherwise the handle remote couldn't get a signal .
When the Low voltage indicator LED light; the battery is completely; Proposed to replace the battery.
Before using the hand wheel, install the driver file, mode of operation is as follows:
XHC-ShuttlePro Installation
2.1: When Mach3 is installed , there will be a folder created named “PlugIns” in the Mach3 folder.
This folder is the location to put and Plugin files that you want Mach3 to know about.
Place“XHC-ShuttlePro.dll” in the Mach3PlugIns folder. Check and make sure it is there.
Setup diver for Probe Z surface function;M930.m1s copy the installation directory to the MACH3 ..Mach3macrosMach3Mill
2.2: Now that the XHC-ShuttlePro.dll file is in Mach3PlugIns, the next step is to connect the ShuttlePro. If you are certain that your ShuttlePro is working and your hardware is working thenyou can simply plug in the ShuttlePro to one of the USB ports.
2.3: Once the ShuttlePro is connected, start Mach3 and go to the “Config” menu choice and select
“ConfigPlugins”. You should see the ShuttlePro choice with a green checkmark in front of it. If it
is not checked, you can check it. The checkmark means that Mach3 found the ShuttlePro on
tartup. Click the “CONFIG” in yellow and set the buttons as you wish.
2.4:Once you have the proper button selected in the Mach3 ShuttlePro Plugin CONFIG menu, your Shuttle device should be working properly.
Applications:
The Wireless Manual Pulse Generator can are widely used in CNC milling machine, CNC milling, CNC lathes, machining centers and other areas.
Detail pictures:
Package included:
· 1 x Wireless USB Receiver
· 1 x CNC Wireless Remote Handle
· 1 x Manual
· 1 x CD
Contact Person: Ms. Kimi Liu
Tel: +86 135 106 75756 / +86 131 0721 9945
