T961 Desktop Reflow Oven with conveyor 730*230mm 6 temp Zones 3.5KW Soldering Machine

Basic Information
Place of Origin: China
Brand Name: Puhui
Certification: CE
Model Number: T961
Minimum Order Quantity: 1
Price: $1080
Packaging Details: wooden box
Delivery Time: 2-3 days
Payment Terms: T/T; PayPal
Supply Ability: 200 Per month
Detail Information
Power: 3.5kw Dimensions: 1000*466*445mm
Heating Zone Quantity: Upper3/down3 Heating Area: 230*730mm
Heating Up Time: Around 7 Mins
High Light:

T961 Desktop Reflow Oven


730*230mm Desktop Reflow Oven


3.5KW Soldering Machine

Product Description

Hottest Conveyor type Mini SMT Reflow Oven T961

230*730mm 6 Zones 3.5KW Soldering Welding Machine

Special desgin for LED / SMD


Technical Paramater for T961: 



The heating zone quantity


The length of the heating zone


The heating type

intelligent level sirocco and rapid infrared heating

The cooling zone quantity


Maximum width of PCB board


The operation direction


Delivery options

Net transmission&chain transmission

The speed of conveyer belt


The power supply

220V  50/60Hz

Peak power


Heating up time

Around 7mins

Temperature control range

Room temperature-300    

Temperature control mode

PID closed-loop control

Temperature control accuracy


PCB temperature distribution deviation


Overall dimensions


Machine weight




1. This machine selects the intelligent level sirocco and rapid infrared heating technology controlling, equipped with special design wind wheel, speed stability and uniform temperature, suit for uninterrupted soldering the LED and BGA components.

2. This machine is equipped with the crawler-type and six temperature area heating systems, and each temperature area uses independent PID controlling and up-down heating type, can make the inside temperature more accurate and well-proportioned, just take about 7 minutes can let it heat up to the working temperature from the room temperature.

3. Intelligent temperature wave heating type, oversized capacity wave selection, have eight temperature waves can  satisfy various welding technological requirements.
4. Use programmable technology, preset the temperature wave memory storage function, can complete the whole welding process automatically according to your presetting wave.
5. Adopt the thermocouple temperature measurement and add the compensation circuit, make the temperature  measurement more accurate, the wave more perfect.6. Use PID intelligent temperature control technology; make the temperature control more accurately.    Adopt the imported large current solidstate relay noncontact output can effectively avoid the IC or circuit board damage due to the rapid or uninterrupted warming up, make the whole welding process more scientific safety.
7. Transmission system adopt imported frequency conversion motor, PID closedloop speed, smooth operation,  speed adjustable range 0-290mm/min.8. Adopt independent wheel structure and special stainless steel strut, durable wearresisting runs smoothly, speed  precision can reach ±10mm/min.9. Independent cooling zone, to ensure the PCB board of low temperature when the required.10. Friendly human-machine operation interface, perfect LCD display, no need to connect with the PC, can watch the whole repairing process very clearly.
11. Ergonomic design, practical and easily operated. Good build quality but at the same time light weight and a small footprint allows the T-960 to be easily bench positioned, transported or stored.

Foundation for wave set:

1. The reflow soldering theory and the temperature wave

When the PCB board goes into heat up area (dry area), the solvent and gas in the solder paste will evaporate. At the same time, the flux can wet the pad and the component tip and foot. The solder paste melts, caves in and covers the pad, leading to the pad and component pins insulate the oxygen. PCB board goes into heat preservation area. PCB board and components get full preheating. In case of damaging the PCB and components when it goes into the welding area and the temperature heats up quickly. When PCB board goes into the welding area, the temperature heats up and the solder paste melts. When PCB board goes in to cooling area, the liquid solder paste the soldering points solidify. The reflow process is finished.

The temperature is the key to welding quality. The actual and the setting temperature warming slope and the peak temperature should be accordant. Before the temperature reaches 160°, please control the heat up speed in about  1°/S. If heat up too quickly, the PCB board and the components will be damaged, and the PCB board may be out  of shape. On the other side, the flux volatilizes too fast. And it is easy to make soldering tin ball. Set the peak temperature 20°-40°higher than the solder paste melting point. Set the reflow time 10S~60S. If the peak temperature is low or the reflow time is short, it will affect the welding quality, and serious is causing the solder paste does not melt. If the peak temperature is high or the reflow time is long, the metal power will be oxidized and affect the welding quality and serious is causing the component and PCB board damaged.
2. The set of the temperature wave

Set the wave according to the solder paste and the above foundation. Different solder paste, choose and set different waves. In addition, the temperature wave has related to the PCB, the density and size of components. Generally lead free welding temperature should be higher 40° than melting point.


100% Real Pictures as follows:

T961 Desktop Reflow Oven with conveyor 730*230mm 6 temp Zones 3.5KW Soldering Machine 0


T961 Desktop Reflow Oven with conveyor 730*230mm 6 temp Zones 3.5KW Soldering Machine 1


T961 Desktop Reflow Oven with conveyor 730*230mm 6 temp Zones 3.5KW Soldering Machine 2


T961 Desktop Reflow Oven with conveyor 730*230mm 6 temp Zones 3.5KW Soldering Machine 3


The complete machine has a warranty period of 1 year from the time of purchase and lifetime service.
We always provide spare parts of machine, factory reliable direct supply.
We provide online Q/A and troubleshooting support and technical advice service.

Provide one to one after-sale service. Each machine 100% tested well before ship out.
Tech support:
Kimi Mob: 0086 135 106 75756
Skype: kimiliu89

Welcome to follow us in YouTube:

If you want to see more information and videos, please contact us by E-mail.
We will response you at the first time.


Contact Details
Adam Chen

Phone Number : +86 135 106 75756

WhatsApp : +008613510675756